Every electrical equipment has its service life, and so does the freshness cabinet, reasonable use and maintenance can effectively increase the service life, but if it is overloaded for a long time, then it will reduce its service life. So in the use of freshness cabinet, pay attention to not let its overload work. Freshness cabinet overload mainly because the cabinet temperature is too high, not up to the target temperature set by the temperature controller, general freshness cabinet overload is because of the use of freshness cabinet and maintenance is not properly caused, then how to make sure that the freshness cabinet does not overload the work?

1. Environmental factors

Ambient temperature is too high, will lead to the internal temperature of the freshness cabinet is difficult to come down, which leads to the freshness cabinet compressor non-stop work and overload, overload for a long time will reduce the service life of the compressor, and in serious cases, will also burn the compressor. Therefore, it is very important to reduce the ambient temperature of the cabinet, especially in summer, to avoid overloading the cabinet due to high ambient temperature.

2. Location of the cabinet

Poor heat dissipation in the crisper itself can lead to overloading of the compressor. There are two situations, one is that the fresh food cabinet is placed in a narrow space, which leads to poor heat dissipation; the other is that the fresh food cabinet is not dusted for a long time, and the condenser and compressor are covered with thick dust, which leads to the compressor and condenser not being able to dissipate the heat, and with low heat dissipation, the compressor will be overloaded non-stop. Therefore, avoid putting the cabinet in a narrow space, leave more than 20cm of cooling space around it, and clean the internal dust regularly.

3. Quality of Fresh Food Cabinet

There is another reason for overloading the freshness cabinet, that is to buy a poor quality freshness cabinet, which has no insulation or very poor insulation, the cold air leakage is serious, the internal temperature can not reach the temperature control setting temperature, resulting in overloading of the refrigeration system of the freshness cabinet.